Here is an old post that never got published from last summer. The beer turned out good but darker and maltier then I expected. I attribute this to the perl and cara malt. If i were to brew it again I would halve the cara malt and split the base malt 50% 2row and 50% perl.

We spent a recent long weekend at Little River State Park in Vermont. It is just outside Waterbury (check out Prohibition Pig and Ben & Jerry’s Factory) and near Stowe home of The Alchemist. The park offered some great views and swimming and the beer in the area was fantastic. Heady Topper was awesome. I really liked Focal Banger and Joanna was a big fan of Crusher. They have that juicy NEIPA character but they also have a bit more bitterness and dankness that I really liked. My Rye IPA is getting low so its time to brew and a Heady Topper clone is whats on my mind.

The beer has dried up! Time to get back to business. Up first several IPAs. It’s time to brew a New England IPA (NEIPA). I have had a chance to try the great NEIPA Mass Riot from Prison City and a friend was nice enough to share some brews from Treehouse. The signature of this style is low bitterness but a huge juicy hop flavor and smell. It generally has a nice full/soft mouthfeel and is as cloudy as a glass of orange juice.  Below are the keys to a good NEIPA from my research.

1. Water profile – Opposite of traditional IPAs this style calls for high amounts of Chloride and low levels of Sulfate.
2. Hops – Few if any hops added during the boil. Most of the hops should be added during a whirlpool. That whirlpool should occur at lower temp then right after knockout to protect the volatile hops oils you want in your beer. Citra, Mosaic, and Galaxy are very popular.
3. Grain – Wheat, Oats, and Barley are popular to help add body and haze.
4. Mash – Keep your mash pH around 5.3. Acidify your sparge water.
5. Dry Hop – Should be done at full krausen not at the tail end of fermentation.

OG 1.065 / FG 1.013 / ABV 6.86% / IBU 36 / SRM 4.76

18# 2-row
4# Marris Otter
1# Flaked Oats
1# Flaked Barley
0.5# Wheat Malt
0.5# Honey Malt
1.5oz Warrior @ 60 min
2oz Citra @ 0 min
2oz Mosaic @ 0 min
2oz Simcoe @ 0 min
2oz Citra Whirlpool @ 160° for 30 min
2oz Mosaic Whirlpool @ 160° for 30 min
2oz Simcoe Whirlpool @ 160° for 30 min
3oz Citra Dry hop @ full krausen
2oz Mosaic Dry hop @ full krausen
1oz Simcoe Dry hop @ full krausen
3oz Citra Dry hop in keg
2oz Mosaic Dry hop in keg
1oz Simcoe Dry hop in keg

Water target – Ca 96 – Mg 12 – SO 74 – Na 11 – Cl 118

Mash at 153° for 60 minutes then raise to 168° and hold for 10 minutes.  Collect 14 gallons and boil for 60 minutes. Produces 12 gallons at the end of the boil and 11 gallons in the fermenter.

GigaYeast – Vermont IPA Yeast

Brew day notes:
Salts – Added 6g of Gypsum and 14g of Calcium Chloride to 19 gallons

Mash was initially a pH of 5.56. Added 6ml of lactic acid to the mash and 5ml to the remaining sparge water. Mash pH settled at 5.35

I am going to add a splitter to also pump water inside the coil  

Mashing

Mashing in TUN

Sweet wort run off

Hops explosion after dry hop at high krausen

Looking and tasting good on keg day (14 days after brew day)

I brewed up a batch of Pliny the Elder clone. Brewed the week before Christmas and it was pouring on new years. It came out great. I have never had Pliny so I cant say if it was accurate to the original. I split the batch between US-05 yeast and a new yeast by Rochester Yeast Co. AM-CAL.  The US-05 finished faster and dryer.  The AM-CAL had more character by adding a bit of spiciness.

Actual
OG: 1.074,
FG: 1.015 (US-05), 1.018 (Roc AM-CAL)
ABV: ~7.70%

24.5# 2-Row
1.25# Corn Sugar
0.5# Crystal 60L

2 oz Warrior Pellet – 90 min
0.66 oz Columbus Pellet – 90 min
2 oz Amarillo Pellet – 45 min
2 oz Simcoe Pellet – 30 min
1.5 oz Cascade Pellet – Whirlpool 15 min
1.5 oz Centennial Pellet – Whirlpool 15 min
1.5 oz Amarillo Pellet – Whirlpool 15 min
1.5 oz Simcoe Pellet – Whirlpool 15 min
2 oz Simcoe Pellet – Dry Hop Fermenter
1.66 oz Cascade Pellet – Dry Hop – Fermenter
1 oz Columbus Pellet – Dry Hop – Fermenter
2 oz Simcoe Pellet – Dry Hop – Keg
1.5 oz Cascade Pellet – Dry Hop – Keg
0.72 oz Amarillo Pellet – Dry Hop – Keg
0.72 oz Columbus Pellet – Dry Hop – Keg

I had a local Kolsch on draft on a hot day and it has been in my head to brew a batch. The Sept/Oct 2016 issue of Zymurgy hit my mail box and had the National Homebrew Competition results.  Joe Edidin of the Tennessee Valley Homebrewer’s won the light hybrid beer category with a good looking Kolsch recipe. It uses a lager yeast vs the traditional Kolsch ale yeast. After scaling up to 12 gallons and adjusting for my system I ended up with the following recipe.

OG 1.049 / FG 1.010 / ABV 5.05% / IBU 29 / SRM 3.24

16# Pilsner malt
2# Vienna malt
1# Carafoam malt
.5# Acidulated malt
3.75oz Tettnang @ 60
1oz Tettnang @ 15
0.25oz Tettnang @ 1

Mash at 148° for 60 minutes then raise to 164° and hold for 10 minutes.  Collect 15 gallons and boil for 90 minutes.

White Labs WLP830 German Lager – 5L Starter (decanted)
Ferment 14 days @ 54°